HARMAN’s Studer Introduces New MADI Card to Accompany D23 I/O System

AMSTERDAM, The Netherlands – In correlation with the introduction of its D23m I/O system and A-Link 3 Gbit/s optical interface, HARMAN’s Studer is announcing the first MADI I/O card specifically designed to fit in the new D23 frame, which works seamlessly with Studer Vista X and Vista V digital consoles. The card may also be used in the Vista 1 I/O card slot.
Author:
Publish date:

AMSTERDAM, The Netherlands – In correlation with the introduction of its D23m I/O system and A-Link 3 Gbit/s optical interface, HARMAN’s Studer is announcing the first MADI I/O card specifically designed to fit in the new D23 frame, which works seamlessly with Studer Vista X and Vista V digital consoles. The card may also be used in the Vista 1 I/O card slot.

The new I/O card is a dual slot card fitted with two redundant MADI interfaces and provides up to 128 channels of inputs and 128 channels of outputs on the two fully redundant interfaces. SFP modules are used for the front panel MADI interfaces and these hot-pluggable devices are available in a variety of optical and electrical formats.

MADI is a worldwide standard and is used for high capacity interfaces to much studio equipment such as Digital Audio Workstations (DAWs), video and audio routers, other consoles and, most importantly, stage boxes. Studer stage boxes have embedded control within the MADI stream, even if all 64 channels are used for audio. This new card may be connected to two Studer stage boxes, either D21m type or the Compact Stagebox. Full microphone control and remote frame status monitoring for both frames is provided on the console application.

Each of the two MADI interfaces provides dual outputs (with the same audio and control data). The MADI inputs will automatically switch in less than a millisecond to the reserve input if the data is corrupt or fails, thus providing full cable redundancy for typical OB operations.

MADI channel count to the D23m backplane may be set for both interfaces in eight channel steps individually from eight channels to 64 channels. MADI outputs may be set to 56-channel mode for compatibility with legacy equipment. MADI inputs may be in either 64- or 56-channel mode. Input sample rate converters may be enabled for use with non-synchronous sources.

The MADI interfaces will run at 44.1 kHz, 48kHz, 88.1kHz and 96kHz in the D23m frame. Channel count is halved unless two pairs of cables are used.

HARMAN (www.harman.com) designs, manufactures and markets premier audio, visual, infotainment and integrated control solutions for the automotive, consumer and professional markets. With leading brands including AKG®, Harman Kardon®, Infinity®, JBL®, Lexicon® and Mark Levinson ®, the Company is admired by audiophiles, musicians and the entertainment venues where they perform. More than 25 million automobiles on the road today are equipped with HARMAN audio and infotainment systems. HARMAN has a workforce of approximately 16,000 people across the Americas, Europe, and Asia and reported sales of $5.3 billion for the twelve months ended June 30, 2014.

Related

Colonie - Logo Small

The Colonie Promotes Graham Chapman to Editor

The Colonie has announced that Graham Chapman has been promoted to editor, continuing the Chicago-based postproduction company’s long tradition of nurturing extraordinary young talent and developing its next generation of editors from within.

RTI_RTIXCEL_Experience

RTI Launches Multi-Tiered RTIXCEL Training Program

RTI, a leading control and automation manufacturer for residential and commercial settings, today announced that the RTIXCEL Training Program has officially launched. RTIXCEL offers a range of options designed to give custom installers the resources needed to master Integration Designer® APEX and gain a deeper knowledge of the technologies they use every day. RTIXCEL Online, RTI's new state-of-the-art learning system, delivers a comprehensive curriculum, allowing dealers to learn effectively at their own pace. Online learning complements other RTIXCEL training programs, including TechTalk webinars, on-site training held around the world, and the RTIXCEL Experience, a three-day, hands-on training hosted at RTI headquarters in Minnesota. These accredited courses give integrators education units for CEDIA and AVIXA certifications.

BenQ_InstaShow

BenQ Amps Up 21st Century Learning at TCEA 2019

BenQ, an internationally renowned provider of visual display solutions, will feature its purpose-built display solutions for education at the 2019 Texas Computer Education Association (TCEA) Convention and Exposition, Feb. 4-8 at the Henry B. González Convention Center in San Antonio. In booth 1562, BenQ will show educators interactive flat panels, laser projectors and collaboration solutions that will help transform the learning experience to drive success for every student.